Fluid pressure sensor with connector plug and pin set. 1/8" NPT fitting. Stainless steel body and wetted surface. Rated in PSIg (gauge pressure). Sensors are generally used as fluid (fuel, oil, transmission) sensors. Select pressure rating in the drop down menu.
Full Function Engineering
SP2 Gauge Pressure Sensor
Thread: 1/8″ NPT
Housing Material: 316 Stainless
Response Time:
Output: .5-4.5 VDC
Input: 5 VDC
Operating Pressure:
SP2 -10G : 0-1000 kPa (0-145.04 Psi)
SP2- 140G : 0-14000 kPa (0-2030 Psi)
Operating Temp: -40C – 125C ( -40F- 257F)
Compensated temp. Range: 0C ~ 85C (32F ~ 185F)
Operational Media: Liquid/Gas
Shock: No Change @ 10g RMS (20Hz-2000Hz)
Impact: 100g ,11ms (Max)
Accuracy: 0.5% FS
Non-Linearity: 0.05%FS (Typical) ,0.025%FS (Max)
Repeatability: 0.05%FS (Typical), 0.075%FS (Max)
Hysteresis: 0.05%FS (Typical), 0.075%FS (Max)
Each sensor has been individually calibrated and tested and include a serial matched data sheet as well as 3 pin female connector kit.